Visible Light Degradable Acridine-Containing Polyurethanes in an Aqueous Environment.

Light degradable polymers hold significant promise in a wide range of applications including the fabrication of optically recyclable materials, responsive coatings and adhesives, and controlled drug delivery. Here, we report the synthesis of polyurethanes that can be degraded under irradiation of visible light (≤450 nm) from commercial LED (3-15 W) light sources. The photolysis occurs in an aqueous environment via photocleavage of an acridine moiety incorporated within the backbone of the polymer chains. Analysis of the quantum yield as a function of wavelength reveals highly efficient photoreactivity at up to 440 nm activation, which is red-shifted compared to the UV-vis absorbance of the chromophore. The potential of our chemical system in biomaterials is demonstrated by the fabrication of an in situ forming hydrogel that can be degraded by visible light.

Triplet sensitized photolysis of a vinyl azide: direct detection of a triplet vinyl azide and nitrene.

Photolysis of vinylazide 1, which has a built-in acetophenone triplet sensitizer, in argon-saturated toluene results in azirine 2, whereas irradiation in oxygen-saturated toluene yields cyanide derivatives 3 and 4. Laser flash photolysis of azide 1 in argon-saturated acetonitrile shows formation of vinylnitrene 1c, which has a λmax at ∼300 nm and a lifetime of ∼1 ms. Vinylnitrene 1c is formed with a rate constant of 4.25 × 10(5) s(-1) from triplet 1,2-biradical 1b. Laser flash photolysis of 1 in oxygen-saturated acetonitrile results in 1c-O (λmax = 430 nm, τ ≈ 420 µs acetonitrile). Density functional theory (DFT) calculations were used to aid in the characterization of the intermediates formed upon irradiation of azide 1 and to validate the proposed mechanism for its photoreactivity.

Photochemical functionalization of polymer surfaces for microfabricated devices.

Herein we report the topochemical modification of polymer surfaces with perfluorinated aromatic azides. The aryl azides, which have quaternary amine or aldehyde functional groups, were linked to the surface of the polymer by UV irradiation. The polymer substrates used in this study were cyclic olefin copolymer and poly(methyl methacrylate). These substrates were characterized before and after modification using reflection-absorption infrared spectroscopy, sessile water contact angle measurements, and X-ray photoelectron spectroscopy. Analysis of the surface confirmed the presence of aromatic groups with aldehyde or quaternary amine functionality. Enzyme immobilization and patterning onto polymer surfaces were studied using confocal microscopy. Enzymatic digests of protein were carried out on modified probes manufactured from thermoplastic substrates, and the resulting peptide analysis was completed using matrix-assisted laser desorption/ionization mass spectrometry. The use of functionalized perfluorinated aromatic azides allows the surface chemistry of thermoplastics to be tailored for specific lab-on-a-chip applications.

Selective formation of triplet alkyl nitrenes from photolysis of beta-azido-propiophenone and their reactivity.

Photolysis of beta-azido propiophenone derivatives, 1, with built-in sensitizer units, leads to selective formation of triplet alkyl nitrenes 2 that were detected directly with laser flash photolysis (lambdamax = 325 nm, tau = 27 ms) and ESR spectroscopy (|D/hc| = 1.64 cm-1, |E/hc| = 0.004 cm-1). Nitrenes 2 were further characterized with argon matrix isolation, isotope labeling, and molecular modeling. The triplet alkyl nitrenes are persistent intermediates that do not abstract H-atoms from the solvent but do decay by dimerizing with another triplet nitrene to form azo products, rather than reacting with an azide precursor. The azo dimer tautomerizes and rearranges to form heterocyclic compound 3. Nitrene 2a, with an n,pi* configuration as the lowest triplet excited state of the its ketone sensitizer moiety, undergoes intramolecular 1,4-H-atom abstraction to form biradical 6, which was identified by argon matrix isolation, isotope labeling, and molecular modeling. beta-Azido-p-methoxy-propiophenone, with a pi,pi* lowest excited state of its triplet sensitizer moiety, does not undergo any secondary photoreactions but selectively yields only triplet alkyl nitrene intermediates that dimerize to form 3b.

Photoinduced C-N bond cleavage in 2-azido-1,3-diphenyl-propan-1-one derivatives: photorelease of hydrazoic acid.

Photolysis of 3-azido-1,3-diphenyl-propan-1-one (1a) in toluene yields 1,3-diphenyl-propen-1-one (2), whereas irradiation of 3-azido-2,2-dimethyl-1,3-diphenyl-propan-1-one (1b) results in the formation of mainly 2,2-dimethyl-1,3-diphenyl-propan-1-one. Laser flash photolysis (308 nm) of 1a,b in acetonitrile reveals a transient absorption (lambda max = approximately 310 nm) due to the formation of radicals 4a and 4b, respectively, which have lifetimes of approximately 14 micros at ambient temperature. TD-DFT calculations (B3LYP/6-31+G(d)) reveal that the first and second excited states of the triplet ketone (T1K (n,pi*) and T2K (pi,pi*)) in azide 1a are almost degenerate, at approximately 74 and 76 kcal/mol above the ground state (S0), respectively. Similarly, azide 1b has T1K and T2K 75 and 82 kcal/mol above S0, respectively. The calculated transition state for cleaving the C-N bond is located 71 and 74 kcal/mol above S0 in azides 1a and 1b, respectively. The calculated bond dissociation energies for breaking the C-N bond are 55 and 58 kcal/mol for azides 1a and 1b, respectively, making C-N bond breakage accessible from T1K in azides 1 at ambient temperature. In comparison, the irradiation of azides 1 in argon matrices at 14 K lead to the formation of the corresponding triplet alkyl nitrenes (1-n), via intramolecular energy transfer from T2K. The characterization of 1-n was supported by isotope labeling, IR spectroscopy, and molecular modeling.

Competition between alpha-cleavage and energy transfer in alpha-azidoacetophenones.

Molecular modeling demonstrates that the first excited state of the triplet ketone (T1K) in azide 1b has a (pi,pi*) configuration with an energy that is 66 kcal/mol above its ground state and its second excited state (T2K) is 10 kcal/mol higher in energy and has a (n,pi*) configuration. In comparison, T1K and T2K of azide 1a are almost degenerate at 74 and 77 kcal/mol above the ground state with a (n,pi*) and (pi,pi*) configuration, respectively. Laser flash photolysis (308 nm) of azide 1b in methanol yields a transient absorption (lambdamax=450 nm) due to formation of T1K, which decays with a rate of 2.1 x 105 s-1 to form triplet alkylnitrene 2b (lambdamax=320 nm). The lifetime of nitrene 2b was measured to be 16 ms. In contrast, laser flash photolysis (308 nm) of azide 1a produced transient absorption spectra due to formation of nitrene 2a (lambdamax=320 nm) and benzoyl radical 3a (lambdamax=370 nm). The decay of 3a is 2 x 105 s-1 in methanol, whereas nitrene 2a decays with a rate of approximately 91 s-1. Thus, T1K (pi,pi*) in azide 1b leads to energy transfer to form nitrene 2b; however, alpha-cleavage is not observed since the energy of T2K (n,pi*) is 10 kcal/mol higher in energy than T1K, and therefore, T2K is not populated. In azide 1a both alpha-cleavage and energy transfer are observed from T1K (n,pi*) and T2K (pi,pi*), respectively, since these triplet states are almost degenerate. Photolysis of azide 1a yields mainly product 4, which must arise from recombination of benzoyl radicals 3a with nitrenes 2a. However, products studies for azide 1b also yield 4b as the major product, even though laser flash photolysis of azide 1b does not indicate formation of benzoyl radical 3b. Thus, we hypothesize that benzoyl radicals 3 can also be formed from nitrenes 2. More specifically, nitrene 2 does undergo alpha-photocleavage to form benzoyl radicals and iminyl radicals. The secondary photolysis of nitrenes 2 is further supported with molecular modeling and product studies.

Solid-state photolysis of alpha-azidoacetophenones.

Solid-state photolysis of 1 yields 2 in a crystal-to-crystal reaction. The reaction takes place by alpha-cleavage to form a benzoyl and an azido alkyl radical pair. The azido alkyl radicals rearrange into iminyl radicals and N2. The iminyl and benzoyl radicals are held in close proximity within the crystal lattice, which allows them to combine and form 2. X-ray structure analysis, molecular modeling and trapping studies support this mechanism.

Photolysis of alpha-azidoacetophenones: direct detection of triplet alkyl nitrenes in solution.

We report the first detection of triplet alkyl nitrenes in fluid solution by laser flash photolysis of alpha-azido acetophenone derivatives, 1. Alphazides 1 contain an intramolecular triplet sensitizer, which ensures formation of the triplet alkyl nitrene by bypassing the singlet nitrene intermediate. At room temperature, azides 1 cleave to form benzoyl and methyl azide radicals in competition with triplet energy transfer to form triplet alkyl nitrene. The major photoproduct 3 arises from interception of the triplet alkyl nitrene with benzoyl radicals. The triplet alkyl nitrene intermediates are also trapped with molecular oxygen to yield the corresponding 2-nitrophenylethanone. Laser flash photolysis of 1 reveals that the triplet alkyl nitrenes have absorption around 300 nm. The triplet alkyl nitrenes were further characterized by obtaining their UV and IR spectra in argon matrices. (13)C and (15)N isotope labeling studies allowed us to characterize the C-N stretch of the nitrene intermediate at 1201 cm(-)(1).

Photoenolization as a means to release alcohols.

We have designed molecules which release alcohols upon exposure to UV light independent of the reaction media, making it possible to liberate alcohols in a controlled manner in applications. Photolysis of 2-(2-isopropylbenzoyl)benzoate ester derivatives 4 in various solvents and in thin films results in the liberation of the alcohol moiety from the ester. The reaction mechanism for the release of the alcohol has been elucidated by time-resolved laser flash photolysis. Upon irradiation the triplet excited state of ketone, 4 is formed, and its lifetime can be estimated to be between 0.08 and 0.8 ns. The triplet excited state decays by efficient intramolecular H-atom abstraction to form a 1,4-biradical, 8, that has a lifetime of less than 17 ns and is trapped by molecular oxygen. In the absence of oxygen, biradical 8 intersystem crosses to form photoenols (Z)-9 and (E)-10 in a ratio of 5:2, respectively. Photoenol (Z)-9 has a lifetime of approximately 3000 ns in protic solvents and returns to the starting material through 1,5 intramolecular hydrogen transfer. The other isomer, (E)-10, is much longer lived (>1 ms) and releases the alcohol moiety through an intramolecular lactonization.